Dell U2723QE on a Mac: USB-C, scaling and daisy chain

Dell U2723QE on a Mac: USB-C, scaling and daisy chain

By · Last updated:

The U2723QE runs at 4K 60 Hz, its top refresh, on every Apple silicon Mac, over one USB-C cable that also charges a MacBook at up to 90 W. The catch is a menu setting: in High Resolution, owners see the monitor's USB ports at USB 2.0 speed; in High Data Speed they get USB 3, but an M1 MacBook Pro drops to 30 Hz. Pick "looks like 2560 × 1440" for text the size of a 27-inch 1440p screen, and plan on two cables for two monitors: a daisy chain only mirrors on a Mac.

A 27-inch 4K screen: a big window on the left, and references over a chat on the right. You can drag the windows too.
In numbers
Size27"
Resolution3840 × 2160 (16:9)
Column widths at 2560 × 1440½ 1280 · ⅓ 853 · ¼ 640
Column widths at 3008 × 1692½ 1504 · ⅓ 1003 · ¼ 752
Column widths at 3360 × 1890½ 1680 · ⅓ 1120 · ¼ 840
Column widths at 1920 × 1080½ 960 · ⅓ 640 · ¼ 480

This page is about Dell’s 27-inch UltraSharp U2723QE: 3840 × 2160 at 60 Hz, with a USB-C hub, Ethernet and a stand that pivots to vertical. Its successor, the U2725QE, adds 120 Hz and Thunderbolt. Everything here was checked on October 23 and 26, 2026; reports from owners say so and link to the thread.

One USB-C cable, and the ports

The U2723QE takes the picture over “USB-C upstream/DisplayPort 1.4 Alt Mode with Power Delivery (power up to 90W, HDCP 2.2)”, and also has a DisplayPort 1.4 input, a DisplayPort output, HDMI, USB 3.2 Gen 2 downstream ports (one of them USB-C) and Ethernet (Dell). Macworld found the 90 W “enough even for a MacBook Pro” (Macworld, 2024). Dell’s Irish store showed it as “currently unavailable” on October 26, 2026.

The USB-C port isn’t Thunderbolt. For a single monitor that doesn’t matter: any Mac with Apple silicon drives a 4K display at 60 Hz, since Apple rates each one for at least one 6K display at 60 Hz (MacBook Air · MacBook Pro). It matters for the USB speed and for chaining a second monitor, below.

Owners on Macs: an M2 MacBook Air owner says “It’s works great!” (Reddit, 2025), another runs a MacBook Air on the USB-C port “for both display and charging” (Reddit, 2026), and a 16-inch M1 MacBook Pro gets “a solid 60Hz all the time” (Reddit, 2022).

60 Hz or USB 3: the USB-C Prioritization setting

The monitor’s Display menu has a setting Dell calls USB-C Prioritization, which “allows you to specify the priority to transfer the data with High Resolution or High Data Speed” (Dell Community FAQ). On a Mac, owners report:

Mac High Resolution High Data Speed Source
MacBook Pro 13” M1 4K 60 Hz, ports at USB 2.0 “I can only get 4K @ 30Hz” Reddit, 2022
MacBook Pro M1 “the hub is stuck in USB 2.0 mode which maxes out at 480 Mbps” Reddit, 2022
Mac mini M2 Pro “3840x2160, 60Hz, 30-bit, USB 3.1” Reddit, 2023

So which one to pick depends on what you plug into the monitor. A keyboard, a mouse and a webcam are fine at USB 2.0: stay on High Resolution. For a fast drive or full-speed Ethernet on the monitor, try High Data Speed, then check the refresh rate in System Settings → Displays. If it says 30 Hz, go back to High Resolution and plug fast devices into the Mac itself. We haven’t found an M3, M4 or M5 owner report on High Data Speed yet.

Scaling: 2560 × 1440 on a 27-inch 4K

The panel has 163 pixels per inch (Dell, above), between the roughly 109 macOS is designed for on a regular screen and 218 on a Retina one (Bjango, 2022). That leaves these choices:

  • Looks like 2560 × 1440: text the size of a 27-inch 1440p monitor. macOS draws it at 5120 × 2880 and scales it down, which every Mac can do. Macworld recommends it over 1920 × 1080 too.
  • 1920 × 1080: perfectly sharp, two pixels per point, but everything is a third bigger.
  • 3008 × 1692: 15% smaller text, more room. One MacBook Pro owner runs it, because “Going true 4k resolution results in tiny UI elements” (Reddit, 2025).
  • 3840 × 2160 in sharp mode: only on M1, M2 and M3 Pro, Max and Ultra. On M4 and M5 Macs sharp modes usually stop at “looks like 3360 × 1890” (smcleod.net, 2026).

Sizes are our arithmetic from the pixel density. Scaled modes are a touch softer than a 5K screen; the full table by size and chip is on 4K monitors on a Mac. If the mode you want isn’t listed, open System Settings → Displays → Advanced, turn on “Show resolutions as list” and then “Show all resolutions” (Apple).

Two monitors: a daisy chain only mirrors on a Mac

The U2723QE has a DisplayPort out for chaining a second monitor. On a Mac you get a copy of the first screen. Dell: “Macs with USB-C (DP Alt Mode) do not support monitor daisy-chaining”, and “both monitors are in clone mode” (Dell). The DisplayPort out chains with MST, which macOS doesn’t support (Plugable).

Owners hit it from both sides. An M1 Max MacBook Pro owner chaining a U2723QE to a U2719DC wrote “All four combinations failed to do daisy chaining”, and Dell’s moderator answered that the USB-C downstream port “is data only, not video” (Dell Community, 2022). With the U2723QE second in line, on the DisplayPort out of a U2725QE, an M4 MacBook Air owner found “the U2723QE just doesn’t get detected” (Reddit, 2026).

For two monitors, run a cable from the Mac to each one, on a Mac that drives two external displays. A hub or a chain “does not increase the maximum number of displays” (Apple). Which Air drives how many is in MacBook Air with multiple monitors.

Common problems

  • Ethernet on the monitor doesn’t work. On an M1 MacBook Pro it “didn’t work out of the box”. The fix in Dell’s thread: in Network settings, add the “USB 10/100/1000 LAN” service and move it up the service order (Dell Community, 2022).
  • Ethernet or USB is slow. An M2 MacBook Pro 14 owner was stuck at “480 Mbp/s” even with Dell’s and Realtek’s drivers. The fix in the same thread: set USB-C Prioritization to High Data Speed, unplug and replug the cable, and allow the new device when the Mac asks. Then check you still have 60 Hz (above).
  • Stuck at 30 Hz. Set USB-C Prioritization back to High Resolution. If you go through a dock: an M1 Max owner with two U2723QE on a CalDigit TS4 got 30 Hz after a long sleep, fixed by unplugging the dock for 30 seconds or by turning off “Prevent automatic sleeping on power adapter when the display is off” (Reddit, 2023).
  • It wakes up on its own, or the hub drops. An M1 MacBook Air owner saw “the monitor wakes up randomly when the Mac is asleep” and “the hub kept disconnecting randomly”; Dell had no fix, and they returned it (Reddit, 2025).
  • The second monitor only mirrors. That’s the daisy chain (above): give it its own cable.
  • Everything is huge. macOS picked “looks like 1920 × 1080”. Choose 2560 × 1440 in System Settings → Displays.

Dell’s Easy Arrange or Shoji

Dell’s free Display and Peripheral Manager (DDPM) for macOS lists the U2723QE, and its Easy Arrange lets you “Select from integrated screen layouts to divide your display into zones” (Dell, updated September 2026). DDPM also runs the monitor’s KVM switch (Macworld, above). Shoji · window zones for Mac does the zones part, with three differences that show on a desk with a MacBook or a second monitor:

  • Every screen gets zones, not only the Dell. The MacBook’s own screen and a monitor from another maker get their own layouts.
  • You draw the zones. Right on the screen, any size, overlapping if you want, instead of picking from a list.
  • It keeps up with macOS. Dell lists DDPM’s macOS 27 support as limited to some Macs and says it’s moving to Apple silicon only. Owners of another Dell found DDPM wouldn’t open on macOS 26 until macOS 26.2 (Dell Community, 2026).
Easy Arrange (DDPM) Shoji
Monitors Dell monitors on its list Any monitor, including the MacBook’s screen
Zones Built-in layouts, or one saved from windows you arranged Drawn on the screen, any size, overlapping
Snapping Drag into a zone, or keyboard shortcuts Drag while holding fn (or a key you choose)
macOS 14, 15 and 26 in full; 27 limited 15 or later
Needs DDC/CI on, and a USB connection to the monitor The Accessibility permission
Price Free US$4.99 once, 14-day refund

To switch, draw your Easy Arrange layout in Shoji (steps below) and stop using Easy Arrange for snapping, so one drag doesn’t set off two apps. DDPM can stay for the KVM and the monitor’s settings. If halves and quarters are enough, macOS tiles those on its own, and free Rectangle adds thirds with keyboard shortcuts (Rectangle vs Shoji).

Splitting the screen into windows

macOS tiles windows into halves and quarters on its own (Apple). At “looks like 2560 × 1440”:

  • Halves are 1280 points, the comfortable split, and macOS does them.
  • Thirds are 853 points: fine for a chat, notes or a terminal, tight for a web page.
  • A big window and a side column (8 / 4 twelfths) is 1707 / 853, and the side column splits into two rows of 720. That’s close to the layout in the demo above.
  • At 3008 × 1692, thirds grow to about 1003 points, a full browser each.
  • Two U2723QE side by side, one cable each, make 5120 points across, as wide as a 49-inch 5120 × 1440 screen, with a bezel in the middle. Each keeps its own layout.

Turned vertical

The stand pivots (Dell, above). Then turn the picture in System Settings → Displays: choose an angle in the Rotation menu and click Confirm (Apple). One M4 Mac mini owner runs a U2723QE this way (Reddit, 2026). Vertical, it looks like 1440 × 2560: two stacked windows get 1440 × 1280 each, three get 1440 × 853. More row layouts and the Dock fix are in vertical monitor on a Mac.

Set it up with Shoji

Shoji · window zones for Mac lets you draw these layouts and snap windows into them.

  1. Open Shoji and allow Accessibility when macOS asks. Any app needs it to move other apps’ windows.
  2. From the Shoji menu in the menu bar, choose Edit Zones and pick the Dell.
  3. Start from Halves or Thirds, or drag on the screen to draw your own zones. They snap to a 12 × 8 grid: a big window plus a side column is 8 / 4 twelfths, and the side column splits into two rows.
  4. Save. Hold fn while you drag a window: the zones light up. Let go over one and the window fills it.

Each monitor keeps its own layouts. If the Dell sits next to a MacBook, the laptop screen has its own zones, and when you unplug the USB-C cable, the Dell’s layouts wait for it until you plug it in again. Other screens are in layouts by monitor.

Questions

Does the U2723QE work with a MacBook Pro?

Yes, over the USB-C cable, which also charges it at up to 90 W. Owners report a steady 4K 60 Hz on M1 MacBook Pros. Keep USB-C Prioritization on High Resolution unless you need USB 3 on the monitor.

Does it work with a MacBook Air?

Yes. Every MacBook Air with Apple silicon drives one 4K display at 60 Hz. An M2 Air owner says it works great, and another Air owner uses the one USB-C cable for picture and charging. “Looks like 2560 × 1440” fits under the sharp-mode limit of every chip, base ones included.

Does it work with a Mac mini?

Yes. An M2 Pro Mac mini owner gets 4K 60 Hz with USB 3 on High Data Speed, and an M4 Mac mini owner runs one vertical. The USB-C cable also gives the mini the monitor’s USB ports and Ethernet.

Can I daisy-chain two U2723QE on a Mac?

No. The chain goes through MST on the DisplayPort out, and on a Mac the second monitor mirrors the first or isn’t detected. Connect each monitor to the Mac with its own cable.

Why is my U2723QE stuck at 30 Hz on a Mac?

Check USB-C Prioritization in the monitor’s Display menu: on High Data Speed, some Macs, like the 13-inch M1 MacBook Pro, get 30 Hz. Switch it to High Resolution. Through a dock, unplugging the dock for 30 seconds fixed it for one owner.

Do I need a driver for the U2723QE on a Mac?

No. Resolution and refresh are set in macOS’s own Displays settings. If Ethernet doesn’t show up, adding the “USB 10/100/1000 LAN” service in Network settings fixed it in Dell’s thread. DDPM adds the monitor’s settings, the KVM and Easy Arrange; Shoji does the zones on every screen, the Dell included.

U2723QE or U2725QE for a Mac?

Same 27-inch 4K size and the same 2560 × 1440 sweet spot. The U2725QE adds 120 Hz, a Thunderbolt 4 input with up to 140 W, and a Thunderbolt port that chains a second monitor on a Mac (Dell). If 60 Hz is fine and you use one monitor, the U2723QE does the job.

U2723QE or Dell’s cheaper S2722QC and S2725QC?

The S models are 27-inch 4K too, with USB-C at up to 65 W instead of 90, and Dell’s specs list no Ethernet port. The newer S2725QC adds 120 Hz, and Dell lists it for macOS; Dell never supported the older S2722QC on a Mac, and its firmware updates need Windows. More in Dell S2722QC and S2725QC on a Mac.

Shoji · window zones for Mac

Draw zones on each monitor, drag a window over one, and it snaps in. $4.99 once; if it isn't for you, your money back within 14 days.

$4.99 once · one Mac · macOS 15 or later

Shoji requires a license to use. You get the key by email when you buy.