Dell U2725QE and U3225QE on a Mac: 120 Hz, scaling and daisy chain
By Guido Crego · Last updated:
Both work with any Apple silicon Mac over one Thunderbolt cable that also charges a MacBook, at up to 140 W, and owners report 120 Hz on Macs from a 2020 13-inch M1 MacBook Pro to an M4 Max. For text the size of a 27-inch 1440p screen, pick "looks like 2560 × 1440" on the 27-inch U2725QE and 3008 × 1692 on the 32-inch U3225QE. Chaining a second one? Turn MST off on the first, or the second stays at 60 Hz.
| Size | 32" |
| Resolution | 3840 × 2160 (16:9) |
| Column widths at 3008 × 1692 | ½ 1504 · ⅓ 1003 · ¼ 752 |
| Column widths at 2560 × 1440 | ½ 1280 · ⅓ 853 · ¼ 640 |
| Column widths at 3360 × 1890 | ½ 1680 · ⅓ 1120 · ¼ 840 |
| Column widths at 1920 × 1080 | ½ 960 · ⅓ 640 · ¼ 480 |
This page covers Dell’s two UltraSharp 4K Thunderbolt hub monitors: the 27-inch U2725QE and the 31.5-inch U3225QE. Both are 3840 × 2160 at up to 120 Hz, with the same ports and a stand that pivots to vertical. Everything here was checked on October 18 and 19, 2026; reports from owners say so and link to the thread.
One cable, and the ports
Both have a Thunderbolt 4 input that carries the picture (DisplayPort 1.4 with DSC) and up to 140 W of charging, a Thunderbolt 4 downstream port Dell marks for daisy chain, a DisplayPort 1.4 input, a DisplayPort out, and an HDMI input that “Supports up to UHD 3840 x 2160 120Hz FRL” (Dell, U3225QE · Dell, U2725QE). The 27-inch also lists 2.5 Gb Ethernet and a second USB-C upstream for its KVM switch. Dell’s Canadian store showed the U2725QE as unavailable on the day we checked.
With a MacBook, that one Thunderbolt cable is the whole desk: screen, charging and the monitor’s ports. Use the cable that came with the monitor: Dell warns that “The USB-C cables that are provided with your Mac computer may only support charging” (Dell).
Which Macs get 120 Hz
Apple rates every Mac with Apple silicon for at least one 6K display at 60 Hz, so 4K at 60 Hz works on all of them (MacBook Air · MacBook Pro). It rates the M4 MacBook Pros, the M5 Pro and M5 Max, the M4 and M4 Pro Mac mini and the M5 MacBook Air for 4K at up to 240 Hz (Apple · Apple · Apple · Apple). For M1 and M2 Macs, and the M3 Pro and Max, Apple’s Thunderbolt figures stop at 6K at 60 Hz (Apple), but owners get 4K at 120 Hz:
| Mac | Monitor | Reported | Source |
|---|---|---|---|
| MacBook Pro 13” M1 (2020) | U2725QE | 120 Hz over USB-C, charging too | Reddit, 2026 |
| M1 Max | U3225QE | “Looks like 3008 x 1692 @ 120.00Hz”, “everything looks good” | Reddit, 2026 |
| M2 Max | U3225QE | 3840 × 2160 at 120 Hz | Reddit, 2025 |
| MacBook Pro M3 Max | U3225QE | 120 Hz, sometimes only after replugging the cable | Reddit, 2025 |
| MacBook Pro M4 Max | Two U3225QE, plus a U4025QW | 4K at 120 Hz on both Dells, lid open | Reddit, 2026 |
| Mac mini M4 | U2725QE | 4K at 120 Hz | Reddit, 2026 |
We haven’t found a MacBook Air owner who names a refresh rate on either Dell. On a different 4K 240 Hz monitor, an M2 Air owner saw 120 Hz offered and nothing higher (Apple Community, 2025).
Over HDMI, 4K above 60 Hz needs a Mac whose HDMI port Apple rates for 4K at 240 Hz, and no adapter: “Adapters aren’t supported for these resolutions and refresh rates” (Apple). Thunderbolt avoids the question and charges the Mac.
Scaling: 2560 on the 27-inch, 3008 on the 32-inch
The 27-inch has 163 pixels per inch and the 31.5-inch 140, between the roughly 109 macOS is designed for on a regular screen and 218 on a Retina one (Bjango, 2022). So the right “looks like” setting depends on the size:
- U2725QE: “looks like 2560 × 1440” gives text the size of a 27-inch 1440p monitor. macOS draws it at 5120 × 2880 and scales it down to the panel, which every Mac can do.
- U3225QE: 3008 × 1692 gives that same size, drawn at 6016 × 3384, also within every Mac’s limit. That’s the mode the M1 Max owner above runs at 120 Hz.
- 1920 × 1080 is the only perfectly sharp mode, two pixels per point, but everything is a third bigger on the 27-inch and more than half again on the 32-inch.
- On M4 and M5 Macs, sharp modes usually stop at “looks like 3360 × 1890”, so 3840 × 2160 runs at 1× (smcleod.net, 2026); we haven’t seen an owner report either way for these two Dells. On the 32-inch, 3360 makes text about a tenth smaller than on a 27-inch 1440p screen.
Sizes are our arithmetic from the pixel density. Scaled modes are a touch softer than a 5K screen; the full table by size and chip is on 4K monitors on a Mac. If the mode you want isn’t listed, open System Settings → Displays → Advanced, turn on “Show resolutions as list” and then “Show all resolutions” (Apple).
Two of them on one cable
The Thunderbolt 4 downstream port lets a second monitor hang off the first, so the Mac needs one cable. Dell says Macs daisy-chain over Thunderbolt, “Typically” up to two monitors, and lists both models (Dell). A chain doesn’t raise the number of displays your Mac drives (Apple): a Mac rated for one external display still shows one. How many each Air drives is in MacBook Air with multiple monitors.
The catch owners hit is the second monitor stuck at 60 Hz. With two U2725QE on an M3 Max, “Both monitors work, but the second one is locked to 60hz” (Reddit, 2025). The fix in that thread is turning MST off in the first monitor’s menu:
- An M3 Pro MacBook Pro chaining a U2725QE to a U3225QE: the U3225QE ran at “60Hz or less” until “I turned off MST on u2725qe, and now both of them can choose up to 120 Hz” (Reddit, 2025).
- A 14-inch M1 Pro runs both at 4K 120 Hz: “When enabling MST, the second monitor will run at 4k60hz” (Reddit, 2026).
- An M4 Pro Mac mini with two chained: “4K@120VRR works just fine here”, MST off (Reddit, 2025).
- One M4 Mac mini owner’s fix was different: MST on in the first, off in the second, and “Multi-Monitor Sync” off (Reddit, 2025).
Chain from the Thunderbolt port, not the DisplayPort out. That port chains with MST, and macOS doesn’t support MST (Plugable). Owners confirm it: on an M4 MacBook Air, a U2723QE on the DisplayPort out “just doesn’t get detected” (Reddit, 2026), and on an M5 MacBook Pro the second monitor only mirrors (Reddit, 2026).
Common problems
- The Mac sleeps and wakes all night. A Mac Studio on macOS 26, one Thunderbolt cable to a U2725QE, logged “489 sleep/wake cycles in one night”. The fix was turning off the monitor’s “TBT switch when PC sleep” setting (Reddit, 2026).
- Black screen after sleep. An M4 Mac mini owner gets a connection error and a black screen after forcing sleep on a U2725QE, with no fix posted yet (Reddit, 2026).
- Back at 60 Hz after waking. The M3 Max owner in the table sometimes replugs the Thunderbolt cable to get 120 Hz back.
- The second monitor in a chain is stuck at 60 Hz. Turn MST off on the first one (above).
- A Thunderbolt drive on the monitor shows up as USB. An M4 Mac mini owner’s Thunderbolt SSD on the U2725QE’s downstream port “shows me that it is only a usb device” (Reddit, 2026). Plug fast drives into the Mac itself.
- Ethernet or an audio interface on the monitor drops out. On an M1 MacBook Air, both came back only after power-cycling the monitor (Reddit, 2026).
- Everything is huge. macOS picked “looks like 1920 × 1080”. Choose 2560 × 1440 or 3008 × 1692 in System Settings → Displays.
- The screen flickers. The U2725QE refreshes anywhere from “48 Hz to 120 Hz” (Dell, above). Apple says variable refresh “might produce a flickering or stuttering effect”; turn Adaptive Sync off (Apple).
Dell’s Easy Arrange or Shoji
Dell’s free Display and Peripheral Manager (DDPM) for macOS lists both monitors, and its Easy Arrange lets you “Select from integrated screen layouts to divide your display into zones” (Dell, updated September 2026). Shoji · window zones for Mac does the same job, with three differences that show on a desk with a MacBook or a second monitor:
- Every screen gets zones, not only the Dells. The MacBook’s own screen and a monitor from another maker get their own layouts.
- You draw the zones. Right on the screen, any size, overlapping if you want, instead of picking from a list.
- It keeps up with macOS. Dell lists DDPM’s macOS 27 support as limited to some Macs and says it’s moving to Apple silicon only. Owners of another Dell found DDPM wouldn’t open on macOS 26 until macOS 26.2 (Dell Community, 2026).
| Easy Arrange (DDPM) | Shoji | |
|---|---|---|
| Monitors | Dell monitors on its list | Any monitor, including the MacBook’s screen |
| Zones | Built-in layouts, or one saved from windows you arranged | Drawn on the screen, any size, overlapping |
| Snapping | Drag into a zone, or keyboard shortcuts | Drag while holding fn (or a key you choose) |
| macOS | 14, 15 and 26 in full; 27 limited | 15 or later |
| Needs | DDC/CI on, and a USB connection to the monitor | The Accessibility permission |
| Price | Free | US$4.99 once, 14-day refund |
To switch, draw your Easy Arrange layout in Shoji (steps below) and stop using Easy Arrange for snapping, so one drag doesn’t set off two apps. DDPM can stay for the monitor’s settings. If halves and quarters are enough, macOS tiles those on its own, and free Rectangle adds thirds with keyboard shortcuts (Rectangle vs Shoji).
Splitting the screen into windows
macOS tiles windows into halves and quarters on its own (Apple). At the sizes above:
- The 27-inch at 2560 × 1440: halves of 1280 points work, and macOS does them. Thirds are 853 points, fine for a chat or notes, tight for a web page. A big window and a side column (8 / 4 twelfths) is 1707 / 853, and the side column splits into two rows of 720.
- The 32-inch at 3008 × 1692: thirds are about 1003 points, a full browser each. A wide center with narrow sides is 752 / 1504 / 752. Two-thirds and a third, close to the layout in the demo above, is 2005 / 1003, with each side window about 1003 × 846.
- Two 27-inch side by side: 5120 points across, as wide as a 49-inch 5120 × 1440 screen, with a bezel in the middle. Each keeps its own layout, say code and a terminal on one, references and a chat on the other.
Turned vertical
Both stands pivot 90° (Dell, above). Then turn the picture in System Settings → Displays: choose an angle in the Rotation menu and click Confirm (Apple). A vertical 27-inch looks like 1440 × 2560: two stacked windows get 1440 × 1280 each, three get 1440 × 853. A vertical 32-inch at 1692 × 3008 gives 1692 × 1504 for two and 1692 × 1003 for three. There, draw rows instead of columns: a chat on top, a document below. A missing Rotation menu, the Dock on both screens and more row layouts are in vertical monitor on a Mac.
Set it up with Shoji
Shoji · window zones for Mac lets you draw these layouts and snap windows into them.
- Open Shoji and allow Accessibility when macOS asks. Any app needs it to move other apps’ windows.
- From the Shoji menu in the menu bar, choose Edit Zones and pick the Dell.
- Start from Halves or Thirds, or drag on the screen to draw your own zones. They snap to a 12 × 8 grid: a big window plus a side column is 8 / 4 twelfths, and the side column splits into two rows.
- Save. Hold fn while you drag a window: the zones light up. Let go over one and the window fills it.
Each monitor keeps its own layouts. If the Dell sits next to a MacBook, the laptop screen has its own zones, and when you unplug the Thunderbolt cable, the Dell’s layouts wait for it until you plug it in again. Other screens are in layouts by monitor.
Questions
Does the U2725QE run at 120 Hz on a Mac?
Owners report 120 Hz on a 2020 13-inch M1 MacBook Pro over USB-C and on an M4 Mac mini. Dell rates it for 120 Hz over Thunderbolt 4, DisplayPort and HDMI. If you’re stuck at 60 Hz, use the Thunderbolt cable rather than HDMI through an adapter.
Does the U3225QE work with a MacBook Pro?
Yes, over the Thunderbolt cable, which also charges it at up to 140 W. Owners report 120 Hz on M1 Max, M2 Max, M3 Max and M4 Max, and an M4 Max runs two at 4K 120 Hz with the lid open.
Can I daisy-chain two of them on a Mac?
Yes, from the Thunderbolt 4 downstream port, if your Mac drives two external displays. Turn MST off on the first monitor, or the second stays at 60 Hz. The DisplayPort out doesn’t work for this on a Mac: the second screen mirrors or isn’t detected.
Does it work with a Mac mini M4?
Yes. An M4 Mac mini owner reports the U2725QE at 4K 120 Hz, and an M4 Pro mini runs two chained at 120 Hz. Apple rates the M4 mini for 4K at up to 240 Hz over Thunderbolt or HDMI (Apple).
Does it work with a MacBook Air M4?
Yes, at 60 Hz at least: every MacBook Air with Apple silicon drives a 4K display, and Apple rates the M5 Air for up to 240 Hz. We haven’t found an Air owner report with a refresh rate on these Dells yet. 2560 × 1440 and 3008 × 1692 fit under the sharp-mode limit of every chip, base ones included.
U2725QE or U3225QE for a Mac?
Same ports, same 120 Hz. The 27-inch at 2560 × 1440 is denser, 163 pixels per inch, so text is a little crisper. The 32-inch at 3008 × 1692 gives the same text size with about 17% more room across.
U2725QE or the older U2723QE?
The U2723QE is the 60 Hz 27-inch that came before it. On a Mac the difference is the cable: it takes the picture over USB-C, not Thunderbolt, and charges at up to 90 W instead of 140. In its High Resolution mode owners see the monitor’s USB ports at USB 2.0 speed, and High Data Speed drops some Macs to 30 Hz. It can’t chain a second monitor on a Mac either: two monitors means two cables. The panel has the same 163 pixels per inch, so the same 2560 × 1440 setting. More in Dell U2723QE on a Mac.
Do I need Dell software on a Mac?
No. Resolution and refresh are set in macOS’s own Displays settings. DDPM adds the monitor’s settings and Easy Arrange; Shoji does the zones on every screen, the Dells included.
Shoji · window zones for Mac
Draw zones on each monitor, drag a window over one, and it snaps in. $4.99 once; if it isn't for you, your money back within 14 days.
$4.99 once · one Mac · macOS 15 or later
Shoji requires a license to use. You get the key by email when you buy.