Dell S2722QC and S2725QC on a Mac: flicker, firmware and 120 Hz
By Guido Crego · Last updated:
Both run 4K over one USB-C cable that also charges a MacBook at up to 65 W, but Dell treats them differently on a Mac. The S2722QC (60 Hz) was "never supported in Apple macOS": if it flickers, set the refresh rate to a fixed 60 Hz, and its firmware updater needs a Windows PC. The newer S2725QC lists macOS, runs at 120 Hz over USB-C on Apple silicon, and works with Dell's Mac app. On both, "looks like 2560 × 1440" gives text the size of a 27-inch 1440p screen.
| Size | 27" |
| Resolution | 3840 × 2160 (16:9) |
| Column widths at 2560 × 1440 | ½ 1280 · ⅓ 853 · ¼ 640 |
| Column widths at 1920 × 1080 | ½ 960 · ⅓ 640 · ¼ 480 |
| Column widths at 3008 × 1692 | ½ 1504 · ⅓ 1003 · ¼ 752 |
This page is about Dell’s two budget 27-inch 4K monitors with USB-C: the S2722QC from 2021 and its successor, the “Dell 27 Plus” S2725QC from 2025. The UltraSharp line has its own pages: the U2723QE and the 120 Hz U2725QE. Everything here was checked on November 1 and 4, 2026; reports from owners say so and link to the thread.
Which one you have, and what Dell says about Macs
| S2722QC | S2725QC | |
|---|---|---|
| Panel | 27” IPS, 3840 × 2160, 60 Hz | 27” IPS, 3840 × 2160, 120 Hz |
| Inputs | USB-C (DisplayPort, up to 65 W), two HDMI | USB-C (DisplayPort 1.4, up to 65 W), two HDMI 2.1 |
| macOS on Dell’s spec page | Not listed | “Mac” and “macOS” listed |
| Dell’s Mac app (DDPM) | Not supported | On the list |
| Stand | Height, tilt, swivel, pivot to vertical | Height, tilt, swivel, pivot to vertical |
| Source | Dell | Dell |
On the S2722QC Dell is blunt. Its community manager wrote in 2024 that “the S2722QC was never supported in Apple macOS”, and that Dell’s display apps for Mac “should not work on the S2722QC” (Dell Community, 2024). It still works as a monitor: macOS drives it like any other 4K screen. “Not supported” means no Mac help from Dell and no Dell app. The S2725QC is the one Dell lists for Macs. It has no Thunderbolt and no KVM switch (RTINGS), and the S2722QC’s spec lists neither.
One USB-C cable, and the Mac mini’s front ports
On both, the USB-C port carries the picture, the monitor’s USB ports and up to 65 W of charging (Dell, above). That’s enough for a MacBook Air, and ProVideo Coalition ran a 14-inch M4 MacBook Pro on it: it “worked perfectly so far” (ProVideo Coalition, 2025). Use the USB-C cable that came in the box, as Dell’s user guide says, or another one made for video.
On an M4 Mac mini, plug it into a USB-C port on the back. An owner whose S2722QC said “no usb-c signal from your device” was on the front ones (Apple Community, 2025): Apple lists those as “USB 3 (up to 10Gb/s)”, with video on the Thunderbolt ports and HDMI at the back (Apple).
The S2722QC has a menu setting, USB-C Prioritization, that matters on a Mac. An M4 Mac mini owner compared all three ways in: USB-C on “High Resolution” gave 60 Hz and 30-bit color with the monitor’s USB ports at USB 2.0; on High Data Speed, 60 Hz was gone; over HDMI too (Apple Community, 2024). So stay on High Resolution and plug fast drives into the Mac. The U2723QE has the same trade-off, with a table by Mac.
The S2722QC flicker fix
The best-known S2722QC problem on a Mac is flicker. Dell has a support article for it, “Dell Monitor Screen Flickering When MacBook M1 Refresh Rate is Set as Variable (40-60 Hz)”, which also covers the S2721Q and S2721QS. Dell calls it a compatibility issue and says no hardware swap is needed; the fix is in macOS: System Settings → Displays → the Dell → Refresh Rate → 60 Hertz (Dell).
Owners on M1 Airs and Pros saw “A large portion of the pixels just blink”. Fixed 60 Hz worked, but for some it “does not persist” after reconnecting, so check the setting again after you replug (Dell Community, 2022). An M1 Pro MacBook Pro owner posted the settings Dell’s community manager later pointed Mac owners to (Dell Community, 2022):
- Reset the monitor’s menu to factory settings.
- USB-C Prioritization: High Resolution.
- Smart HDR: off. On, it makes the refresh rate “fluctuate and be variable”.
- True Tone: off.
- Refresh rate: 60 Hz, in System Settings → Displays.
If it still flickers, a blogger with a Dell UltraSharp, who lists the S2722QC among affected models, switched the monitor’s Input Color Format from YCbCr to RGB in its Color menu and replugged the USB-C cable (kaspars.net, 2025). That’s a blogger’s fix, not Dell’s.
S2722QC firmware: you need a Windows PC
Dell: “The firmware for the Dell S2722DC and S2722QC monitors only supports Windows 10 and 11”. There’s no Mac updater. The same article says “Newer revision monitors have firmware version M3B201 and do not need a firmware update”; older ones on M3B102 should get the latest (Dell). So check the version first: if it’s M3B201, you’re done. If not, borrow a Windows PC for the update. A Mac running Windows in a virtual machine doesn’t count: Dell’s article is about computers with ARM processors, which includes every Apple silicon Mac.
The S2725QC at 120 Hz
The S2725QC runs 4K at up to 120 Hz (Dell, above), and owners get it over USB-C on Apple silicon:
| Mac | What they got | Source |
|---|---|---|
| MacBook Pro M1 (macOS 14) | 120 Hz at default scaling, on the included USB-C cable | Apple Community, 2025 |
| MacBook Pro 14” M4 | One cable, 65 W, “worked perfectly so far” | ProVideo Coalition, 2025 |
| MacBook Pro M1 Max, M4 Pro | 4K at 120 Hz | MacRumors, 2025 |
| Mac mini M4 | “fine with 120Hz” at 2560 × 1440 | MacRumors, same thread |
| MacBook Air, then a Mac mini | 120 Hz on Dell’s cable; 3008 × 1692 at 120 Hz on the mini, “no discernible flicker” | ProductReview, 2026 |
| MacBook Pro 13” Intel (2020, macOS 15.5) | Stuck at 30 Hz, unsolved | Apple Community, 2025 |
So on Apple silicon, 120 Hz over one USB-C cable is the normal result. ProVideo Coalition notes that Apple silicon only offers whole-number rates on it, so 119.88 Hz for video work needs the BetterDisplay app. On an Intel Mac, the one report we found was stuck at 30 Hz. Which Macs drive 4K above 60 Hz, and over which port, is on 4K monitors on a Mac.
Scaling: 2560 × 1440 on a 27-inch 4K
Both panels have 163 pixels per inch, between the roughly 109 macOS is designed for on a regular screen and 218 on a Retina one (Bjango, 2022). The choices:
- Looks like 2560 × 1440: text the size of a 27-inch 1440p monitor. macOS draws it at 5120 × 2880 and scales it down, which every Mac can do. The M4 Mac mini owners above, one on each model, run this.
- 1920 × 1080: perfectly sharp, two pixels per point, but everything is a third bigger.
- 3008 × 1692: 15% smaller text, more room. The ProductReview owner above preferred it.
- 3840 × 2160 in sharp mode: only on M1, M2 and M3 Pro, Max and Ultra. On M4 and M5 Macs sharp modes usually stop at “looks like 3360 × 1890” (smcleod.net, 2026).
Sizes are our arithmetic from the pixel density. If the mode you want isn’t listed, open System Settings → Displays → Advanced, turn on “Show resolutions as list” and then “Show all resolutions” (Apple).
Common problems
- “No USB-C signal” on a Mac mini. Move the cable to a port on the back (above). An iMac owner got the same message on an S2725QC after switching USB-C Prioritization to High Resolution (Apple Community, 2025): if it happens right after a menu change, change it back.
- Flicker on the S2722QC. Fixed 60 Hz, Smart HDR off, True Tone off (above). One Mac mini owner had it “every other day” and Dell had no fix beyond saying the monitor isn’t supported on macOS (Dell Community, 2022).
- Stuck at 60 Hz with a second monitor. An S2725QC owner with a 75 Hz monitor next to it got 60 Hz until they connected the Dell first (MacRumors, above).
- Crazy colors on an M4 Mac mini after macOS 26. An S2725QC owner saw “the screen colors go insane” after logging in, over USB-C and HDMI, while an M1 MacBook Air on the same cable was fine. Removing Dell’s app didn’t help, and Dell passed it to its team; unsolved (Dell Community, 2025).
- Everything is huge. macOS picked “looks like 1920 × 1080”. Choose 2560 × 1440 in System Settings → Displays.
Dell’s Easy Arrange or Shoji
Dell’s free Display and Peripheral Manager (DDPM) for macOS lists the S2725QC, not the S2722QC. Its Easy Arrange lets you “Select from integrated screen layouts to divide your display into zones” (Dell, updated September 2026). Shoji · window zones for Mac does the zones part, with differences that show on a desk like this one:
- Every screen gets zones. The S2722QC, which DDPM won’t talk to, the MacBook’s own screen, and a monitor from another maker each get their own layouts.
- You draw the zones. Right on the screen, any size, overlapping if you want, instead of picking from a list.
- No DDC/CI or USB link needed. DDPM “requires DDC/CI to communicate with the monitor” and a USB connection to it (Dell, above). Shoji only needs the Accessibility permission, whatever the monitor.
| Easy Arrange (DDPM) | Shoji | |
|---|---|---|
| Monitors | Dell monitors on its list: the S2725QC, not the S2722QC | Any monitor, including the MacBook’s screen |
| Zones | Built-in layouts | Drawn on the screen, any size, overlapping |
| Snapping | Drag into a zone, or keyboard shortcuts | Drag while holding fn (or a key you choose) |
| macOS | 14, 15 and 26 in full; 27 limited | 15 or later |
| Needs | DDC/CI on, and a USB connection to the monitor | The Accessibility permission |
| Price | Free | US$4.99 once, 14-day refund |
To switch on the S2725QC, draw your Easy Arrange layout in Shoji (steps below) and stop using Easy Arrange for snapping, so one drag doesn’t set off two apps. If halves and quarters are enough, macOS tiles those on its own, and free Rectangle adds thirds with keyboard shortcuts (Rectangle vs Shoji).
Splitting the screen into windows
macOS tiles windows into halves and quarters on its own (Apple). At “looks like 2560 × 1440”:
- Halves are 1280 points, the comfortable split, and macOS does them.
- Thirds are 853 points: fine for a chat, notes or a terminal, tight for a web page.
- A big window and a side column (8 / 4 twelfths) is 1707 / 853, and the side column splits into two rows of 720. That’s close to the layout in the demo above.
- At 3008 × 1692, thirds grow to about 1003 points, a full browser each.
- At 1920 × 1080, halves are 960 and thirds 640: two windows side by side is the most it holds comfortably.
Turned vertical
Both stands pivot (Dell, above). Then turn the picture in System Settings → Displays: choose an angle in the Rotation menu and click Confirm (Apple). Vertical at 2560 × 1440 it looks like 1440 × 2560: two stacked windows get 1440 × 1280 each, three get 1440 × 853. More in vertical monitor on a Mac.
Set it up with Shoji
Shoji · window zones for Mac lets you draw these layouts and snap windows into them.
- Open Shoji and allow Accessibility when macOS asks. Any app needs it to move other apps’ windows.
- From the Shoji menu in the menu bar, choose Edit Zones and pick the Dell.
- Start from Halves or Thirds, or drag on the screen to draw your own zones. They snap to a 12 × 8 grid: a big window plus a side column is 8 / 4 twelfths, and the side column splits into two rows.
- Save. Hold fn while you drag a window: the zones light up. Let go over one and the window fills it.
Each monitor keeps its own layouts. If the Dell sits next to a MacBook, the laptop screen has its own zones, and when you unplug the USB-C cable, the Dell’s layouts wait for it until you plug it in again. Other screens are in layouts by monitor.
Questions
Is the Dell S2722QC compatible with a Mac?
It works: macOS drives it at 4K 60 Hz over USB-C or HDMI. But Dell says it “was never supported in Apple macOS”, so there’s no Dell app, no Mac firmware updater and no Mac help from Dell. The flicker some Macs get is fixed with a fixed 60 Hz refresh rate.
Does the S2722QC work with an M4 Mac mini?
Yes, on a USB-C port at the back. One M4 Mac mini owner got 60 Hz and 30-bit color over USB-C with USB-C Prioritization on High Resolution, and lost 60 Hz on High Data Speed and over HDMI. The front USB-C ports don’t carry video.
Do I need a driver for the S2722QC or S2725QC on a Mac?
No. Resolution and refresh rate are set in System Settings → Displays. For the S2725QC, Dell’s DDPM adds the monitor’s settings and Easy Arrange zones; for the S2722QC there’s nothing from Dell. Shoji does the zones on either.
How do I update the S2722QC firmware from a Mac?
You can’t: Dell’s updater for it runs only on Windows 10 and 11 on an Intel or AMD PC. Units on firmware M3B201 don’t need an update.
Does the S2725QC run at 120 Hz on a MacBook Air?
One owner got 120 Hz from a MacBook Air over Dell’s USB-C cable. Apple rates the M5 Air for 4K above 60 Hz; for earlier Airs it lists 6K at 60 Hz, so treat 120 Hz there as a bonus (details by chip on 4K monitors on a Mac). On Apple silicon MacBook Pros and Mac minis, owners report 120 Hz as the normal result.
S2722QC or S2725QC for a Mac?
The S2725QC: same size and sharpness, 120 Hz instead of 60, macOS on Dell’s list, and a Dell app that works with it. The S2722QC makes sense used and cheap, if you’re fine fixing the refresh rate at 60 Hz and borrowing a Windows PC for firmware. For a USB hub with Ethernet and 90 W, look at the U2723QE.
Shoji · window zones for Mac
Draw zones on each monitor, drag a window over one, and it snaps in. $4.99 once; if it isn't for you, your money back within 14 days.
$4.99 once · one Mac · macOS 15 or later
Shoji requires a license to use. You get the key by email when you buy.