LG UltraFine 5K on a Mac: M4 support, fixes and window layouts

LG UltraFine 5K on a Mac: M4 support, fixes and window layouts

By · Last updated:

Yes, it works with today's Macs, M4 Mac minis included. Apple lists every Mac mini from 2018 on, and owners run it on M4 and M4 Pro Macs, even three at once on a base M4 mini. One Thunderbolt 3 cable carries 5K at 60 Hz, charges a MacBook and feeds the monitor's camera, speakers and USB-C ports, and macOS sets its brightness and volume. At "looks like 2560 × 1440" it's perfectly sharp. LG has discontinued it, so most are bought used: the usual problems and their fixes are below.

A 27-inch 5K screen: a big window on the left, and references over a chat on the right. You can drag the windows too.
In numbers
Size27"
Resolution5120 × 2880 (16:9)
Column widths at 2560 × 1440½ 1280 · ⅓ 853 · ¼ 640
Column widths at 2880 × 1620½ 1440 · ⅓ 960 · ¼ 720
Column widths at 3360 × 1890½ 1680 · ⅓ 1120 · ¼ 840

This page covers the LG UltraFine 5K that Apple sold: the first model (27MD5KA, 2016) and the second (27MD5KL, 2019). Both are 27 inches, 5120 × 2880 and 60 Hz, with one Thunderbolt 3 input. LG lists the 27MD5KL-B as discontinued (LG), and Apple has archived its pages about it. Everything here was checked on October 29, 2026; reports from owners say so and link to the thread.

Which Macs run it

Apple’s page lists 5120 × 2880 at 60 Hz on any “Mac mini introduced in 2018 or later”, “MacBook Air introduced in 2018 or later”, “MacBook Pro introduced in 2016 or later”, “iMac introduced in 2017 or later” and Mac Studio (Apple). That page is from April 2024, before the M4, but newer Macs are rated for more than this monitor needs: every Mac with Apple silicon drives at least one external display at 6K and 60 Hz (MacBook Air · MacBook Pro · Mac mini).

What owners report:

  • Base M4 Mac mini. “Yes, you can run three LG 5k monitors on the base M4 mini using the rear Thunderbolt ports” (Reddit, 2025). That matches Apple’s numbers: two displays at up to 6K plus one at 5K, all over Thunderbolt (Apple). Others bought one used for an M4 mini as “the closest you can get to a 27 inch iMac with modern specs” (Reddit, 2024).
  • M4 Pro. “I used a 1st gen Ultrafine 5k with an M4 Pro until a few weeks ago and it worked perfectly” (Reddit, 2025).
  • M4 MacBook Air with two. It runs “in principle smooth”, though moving and resizing windows got laggy with a lot of Microsoft 365 apps open (Reddit, 2026). How many screens each MacBook Air drives is in MacBook Air with multiple monitors.
  • M5. We found no owner report yet. Apple rates the M5 MacBook Air for one display up to 8K at 60 Hz, or two at 6K (Apple).

60 Hz is the most it does, on any Mac.

The cable and the ports

The monitor has one Thunderbolt 3 port that carries the picture, charges a MacBook at up to 94 W, and connects its camera, microphone, speakers and three USB-C ports (USB 3, up to 5 Gbps) (Apple). Apple’s page for the first model said up to 85 W (Apple). There’s no HDMI or DisplayPort input, and it can’t be daisy-chained.

  • Use the cable that came with it. If it’s lost, Apple says to use “a Thunderbolt 3 cable capable of delivering 5A of power” (Apple).
  • On a Mac mini, a rear port. The rear Thunderbolt ports carry video; the M4 mini’s front USB-C ports aren’t listed for it, and the HDMI port is no use with this monitor (Apple).
  • Straight into the Mac, not a hub. It’s the first fix owners suggest when it’s not detected (below). Docks can add their own trouble: with an M4 Max on a CalDigit TS5 Plus, everything on the dock “disappeared, screen went black for about 10 seconds” (Reddit, 2025).

Scaling: 2560 × 1440 is the sharp one

It’s about 218 pixels per inch, the density macOS is designed for on a Retina screen (Bjango, 2022) and the same as the Studio Display (Apple). At “looks like 2560 × 1440” macOS draws the desktop at the panel’s own 5120 × 2880, with no scaling in between: text the size of a 27-inch 1440p monitor, as sharp as a MacBook’s screen, on every Mac.

A bigger desktop is scaled down, a touch softer. At “looks like 2880 × 1620” text is about 11% smaller (our arithmetic). Sharp modes top out at 3072 points wide on the base M1, M2 and M3 and at 3840 on their Pro and Max versions (BetterDisplay wiki), and usually at 3360 on M4 and M5 chips (smcleod.net, 2026). If a size isn’t listed, open System Settings → Displays → Advanced and turn on “Show resolutions as list” (Apple).

Brightness, volume and the firmware

The monitor has no buttons for them: “Integration with macOS lets you control your display’s volume and brightness without the need for physical buttons on the display” (Apple). There’s no LG driver to install.

Firmware updates come from LG Screen Manager: “Search for it on the Mac App Store, and run the app periodically” (Apple). It’s free, lists the 27MD5KA and 27MD5KL as supported, and notes M1 and M2 support in its history; the latest version, 3.05, is from January 2024 (Mac App Store). Updates can go wrong: one owner’s “failed after 30%. Now the monitor does not power on.”, and the replies could only point to LG support (Reddit, 2026).

When it’s not detected, and other problems

  • Not detected, or the wrong resolution. An M2 Mac mini owner could only pick 3440 × 1440. The advice: use the right Thunderbolt port, try another Thunderbolt cable, and connect straight to the Mac instead of a hub. A new Thunderbolt cable fixed it: “Jetzt geht es” (Apple Community, 2023).
  • It charges the Mac but shows nothing. An M3 MacBook Pro owner got exactly that (Reddit, 2026). Apple’s first check is the cable: the one in the box, or a 5 A Thunderbolt 3 cable. If it still won’t show a picture, Apple sends you to LG for service (Apple).
  • The camera, mic or speakers disappear. An owner with Intel MacBook Pros saw them drop off after half an hour to a few hours in Zoom or Photo Booth, while the picture stayed. The workaround: “disconnecting and reconnecting the Thunderbolt 3 cable immediately makes the Mac recognize the USB connection” (Apple Community, 2020).
  • It flickers when the Mac starts. An owner fixed it with “Auto Start” in LG Screen Manager’s settings, and suggests the app’s Factory Reset if that fails (OWC, 2020).
  • It drops out near a Wi-Fi router. That was the first units: LG said displays made after February 2017 got better shielding, and that moving the router or the display should fix it (9to5Mac, 2017).
  • Pink edges on a used one. A buyer who looked at several: “all of them have the pink screen color on the edges, a problem widely known for the LG” (Reddit, 2026). Ask for a photo of a white screen before you buy.

LG’s app, macOS tiling or Shoji

LG Screen Manager shows the monitor’s information and updates its firmware; its description lists nothing for windows (Mac App Store). So arranging windows is up to macOS or an app. macOS tiles halves and quarters on its own (Apple), and on a 2560-point screen halves are a good fit. People move to Shoji · window zones for Mac when they want more:

  • Thirds and uneven splits. macOS has no thirds. In Shoji you draw a big window and a side column, three columns, or a wide center, right on the screen.
  • A layout for every screen. The MacBook’s own screen gets its zones and the UltraFine gets others, and the LG’s come back when you plug it in again.
  • Drag, don’t memorize. Hold fn while you drag a window and drop it on a zone.
macOS tiling Shoji
Layouts Halves, quarters, half plus two quarters Zones you draw, any size, overlapping if you want
Per monitor The same tiles on every screen Its own layouts for each monitor
How Drag to an edge, the green button, or shortcuts Drag while holding fn (or a key you choose)
Price Included US$4.99 once, 14-day refund

If halves are all you use, macOS is enough. Free Rectangle adds thirds with keyboard shortcuts (Rectangle vs Shoji).

Splitting 2560 × 1440 into windows

  • Halves are 1280 points each, two comfortable windows.
  • Thirds are 853 points: fine for a chat, notes or a terminal, tight for a web page.
  • A big window and a side column, 8 / 4 twelfths, is 1707 / 853, and the side column splits into two rows of 720. That’s close to the demo above: a canvas or code on the left, references over a chat on the right.
  • A wide center with narrow sides, 640 / 1280 / 640, for a chat and a document next to your main window.
  • At “looks like 2880 × 1620”, thirds are 960 points, enough for three real browsers.
  • Two side by side make 5120 points across, the width of a 49-inch 5120 × 1440 screen; three on an M4 Mac mini make 7680.

Set it up with Shoji

Shoji · window zones for Mac lets you draw these layouts and snap windows into them.

  1. Open Shoji and allow Accessibility when macOS asks. Any app needs it to move other apps’ windows.
  2. From the Shoji menu in the menu bar, choose Edit Zones and pick the UltraFine.
  3. Start from Halves or Thirds, or drag on the screen to draw your own zones. They snap to a 12 × 8 grid: a big window plus a side column is 8 / 4 twelfths, and the side column splits into two rows.
  4. Save. Hold fn while you drag a window: the zones light up. Let go over one and the window fills it.

Each monitor keeps its own layouts. If the UltraFine sits next to a MacBook, the laptop screen has its own zones, and when you unplug the Thunderbolt cable, the LG’s layouts wait for it until you plug it in again. Other screens are in layouts by monitor.

Questions

Does the LG UltraFine 5K work with a Mac mini M4?

Yes, from one of the rear Thunderbolt ports, with the Thunderbolt cable from the box. Apple lists every Mac mini from 2018 on, and owners run up to three on a base M4 mini (above).

Can I connect an LG UltraFine 5K to an iMac?

Yes, as a second screen next to the iMac’s own. Apple lists every “iMac introduced in 2017 or later” and the iMac Pro, at 5120 × 2880 and 60 Hz, and its page, written before the M4, says an iMac runs one (Apple). Plug it into a Thunderbolt port on the iMac with the Thunderbolt 3 cable from the box, or “a Thunderbolt 3 cable capable of delivering 5A of power” (Apple). The 2024 24-inch iMac drives one external display up to 6K at 60 Hz over its Thunderbolt / USB 4 ports, and the four-port model two (Apple · Apple). Shoji gives the iMac’s screen and the UltraFine each their own zones.

Does it work with an M4 Pro or M5 Mac?

An M4 Pro owner reports it “worked perfectly”. We found no M5 report yet; Apple rates M5 Macs for at least one display at 6K and 60 Hz, more than this monitor needs.

Why doesn’t my Mac detect it?

Check the cable first: the Thunderbolt 3 one it came with, or a 5 A Thunderbolt 3 cable, straight into a Thunderbolt port on the Mac. Then the fixes above.

Does it need a driver?

No. macOS runs the picture, brightness and volume, and LG Screen Manager only updates the firmware. For window zones there’s Shoji, a download from getshoji.com: it’s not on the Mac App Store.

Is it Retina on a Mac?

At “looks like 2560 × 1440”, yes: two pixels per point at 218 pixels per inch, the Studio Display’s density.

Does it run at 120 Hz?

No. 60 Hz on every Mac.

UltraFine 5K or Studio Display?

The same 27-inch 5K at 218 pixels per inch and 60 Hz, so macOS scales them the same way. Apple’s is brighter at 600 nits against 500, with a 12MP camera, six speakers and two Thunderbolt 5 ports (Apple). The UltraFine is discontinued, so you buy it used. Two other 27-inch 5K monitors sold new, with their setups and fixes: ASUS PA27JCV on a Mac and Samsung ViewFinity S9 on a Mac.

UltraFine 5K or the 24-inch UltraFine 4K?

The 4K is the other LG that Apple sold: 24 inches, sharp at “looks like 1920 × 1080”, no camera, and two can share one Thunderbolt cable, which the 5K can’t do. Its setup and fixes: LG UltraFine 4K on a Mac.

Shoji · window zones for Mac

Draw zones on each monitor, drag a window over one, and it snaps in. $4.99 once; if it isn't for you, your money back within 14 days.

$4.99 once · one Mac · macOS 15 or later

Shoji requires a license to use. You get the key by email when you buy.